Pelican 1430 lid MOLLE panel — slots, MD173
Pelican 1430 lid insert on the factory bosses, no drilling: 349×151 mm, 3 mm ABS, slots, 6 MD173 mounts, castellated edge.
349×151 мм32 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 183 грн
MD173 Mount
MOLLE panels with the MD173 mount are 3 mm ABS panels where the usual bolt holes are replaced by a Ø17.4 mm + Ø5 mm hole pair for the MD173 quick-release fastener. The panel sits on posts installed in the vehicle, safe or case and comes off without tools in seconds: remove, move, refit. Handy when one loaded panel travels between the trunk, the garage and a case, or when the panel must clear the space quickly. This section lists every catalog panel with MD173 holes; any other panel can be switched to MD173 in the generator — pick the “MD173” hole type and set the angle.
Editing section
3D print · STL · generator
MD173 mounting parts
MD173 is a quick-release mount for a panel in a case or on a wall: barrels screw onto the bosses, the panel sits on them and is locked by a latch, and comes off without tools. All parts are ready STL files for 3D printing plus a generator for any height, boss and sheet thickness.
BarrelScrews onto a case boss or a flat surface. Height 19 / 40.5 / 62 mm sets how far the panel stands off the wall; a magnet version exists too.
LatchPivots in the Ø5 hole and hooks into the barrel groove — the panel is locked. Flip it back and the panel comes off.
CapCovers the screw hole on top of the barrel and unused mounting points. Ø9.05 fit or a tighter Ø9.10.
SpacerØ15 with a Ø5 bore for an M4 bolt: 10 / 20 / 30 / 40 mm or any height in the generator.Panels in this section
Pelican 1440 lid MOLLE panel — slots, MD173
Pelican 1440 lid insert on the factory bosses, no drilling: 441×212 mm, 3 mm ABS, slots, 5 MD173 mounts, castellated edge, handle.
441×212 мм70 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 337 грн
Pelican 1440 lid MOLLE panel — slots, MD173, no handle
Pelican 1440 lid insert on the factory bosses, no drilling: 441×212 mm, 3 mm ABS, slots, 6 MD173 mounts, castellated edge, no handle.
441×212 мм79 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 350 грн
Pelican 1440 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1440 lid insert on the factory bosses, no drilling: 441×212 mm, 3 mm ABS, slots + windows, 6 MD173 mounts, castellated edge, no handle.
441×212 мм38 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 367 грн
Pelican 1440 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1440 lid insert on the factory bosses, no drilling: 212×441 mm, 3 mm ABS, slots (rows across), 6 MD173 mounts, castellated edge, no handle.
212×441 мм74 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 339 грн
Pelican 1440 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1440 lid insert on factory bosses: 212×441 mm, 3 mm ABS, slots + windows (rows across), 6 MD173 mounts, castellated edge, no handle.
212×441 мм36 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 374 грн
Pelican 1460 lid MOLLE panel — slots, MD173
Pelican 1460 lid insert on the factory bosses, no drilling: 455×244 mm, 3 mm ABS, slots, 4 MD173 mounts, castellated edge, handle.
455×244 мм85 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 386 грн
Pelican 1460 lid MOLLE panel — slots, MD173, no handle
Pelican 1460 lid insert on the factory bosses, no drilling: 455×244 mm, 3 mm ABS, slots, 4 MD173 mounts, castellated edge, no handle.
455×244 мм95 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 399 грн
Pelican 1460 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1460 lid insert on the factory bosses, no drilling: 455×244 mm, 3 mm ABS, slots + windows, 4 MD173 mounts, castellated edge, no handle.
455×244 мм41 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 427 грн
Pelican 1460 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1460 lid insert on the factory bosses, no drilling: 244×455 mm, 3 mm ABS, slots (rows across), 4 MD173 mounts, castellated edge, no handle.
244×455 мм84 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 375 грн
Pelican 1460 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1460 lid insert on factory bosses: 244×455 mm, 3 mm ABS, slots + windows (rows across), 4 MD173 mounts, castellated edge, no handle.
244×455 мм40 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 418 грн
Pelican 1500 lid MOLLE panel — slots, MD173
Pelican 1500 lid insert on the factory bosses, no drilling: 421×279 mm, 3 mm ABS, slots, 4 MD173 mounts, castellated edge, handle.
421×279 мм88 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 401 грн
Pelican 1500 lid MOLLE panel — slots, MD173, no handle
Pelican 1500 lid insert on the factory bosses, no drilling: 421×279 mm, 3 mm ABS, slots, 5 MD173 mounts, castellated edge, no handle.
421×279 мм94 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 407 грн
Pelican 1500 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1500 lid insert on the factory bosses, no drilling: 421×279 mm, 3 mm ABS, slots + windows, 5 MD173 mounts, castellated edge, no handle.
421×279 мм46 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 438 грн
Pelican 1500 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1500 lid insert on the factory bosses, no drilling: 279×421 mm, 3 mm ABS, slots (rows across), 5 MD173 mounts, castellated edge, no handle.
279×421 мм90 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 399 грн
Pelican 1500 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1500 lid insert on factory bosses: 279×421 mm, 3 mm ABS, slots + windows (rows across), 5 MD173 mounts, castellated edge, no handle.
279×421 мм46 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 431 грн
Pelican 1506 Air lid MOLLE panel — slots, MD173
Pelican 1506 Air lid insert on the factory bosses, no drilling: 450×212 mm, 3 mm ABS, slots, 4 MD173 mounts, castellated edge, handle.
450×212 мм68 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 330 грн
Pelican 1506 Air lid MOLLE panel — slots, MD173, no handle
Pelican 1506 Air lid insert on the factory bosses, no drilling: 450×212 mm, 3 mm ABS, slots, 4 MD173 mounts, castellated edge, no handle.
450×212 мм78 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 343 грн
Pelican 1506 Air lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1506 Air lid insert on the factory bosses, no drilling: 450×212 mm, 3 mm ABS, slots + windows, 4 MD173 mounts, castellated edge, no handle.
450×212 мм39 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 375 грн
Pelican 1506 Air lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1506 Air lid insert on the factory bosses, no drilling: 212×450 mm, 3 mm ABS, slots (rows across), 4 MD173 mounts, castellated edge, no handle.
212×450 мм74 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 334 грн
Pelican 1506 Air lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1506 Air lid insert on factory bosses: 212×450 mm, 3 mm ABS, slots + windows (rows across), 4 MD173 mounts, castellated edge, no handle.
212×450 мм37 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 381 грн
Pelican 1510 lid MOLLE panel — slots, MD173
Pelican 1510 lid insert on the factory bosses, no drilling: 493×268 mm, 3 mm ABS, slots, 5 MD173 mounts, castellated edge, handle.
493×268 мм106 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 459 грн
Pelican 1510 lid MOLLE panel — slots, MD173, no handle
Pelican 1510 lid insert on the factory bosses, no drilling: 493×268 mm, 3 mm ABS, slots, 6 MD173 mounts, castellated edge, no handle.
493×268 мм112 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 466 грн
Pelican 1510 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1510 lid insert on the factory bosses, no drilling: 493×268 mm, 3 mm ABS, slots + windows, 6 MD173 mounts, castellated edge, no handle.
493×268 мм53 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 508 грн
Pelican 1510 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1510 lid insert on the factory bosses, no drilling: 268×493 mm, 3 mm ABS, slots (rows across), 6 MD173 mounts, castellated edge, no handle.
268×493 мм103 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 447 грн
Pelican 1510 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1510 lid insert on factory bosses: 268×493 mm, 3 mm ABS, slots + windows (rows across), 6 MD173 mounts, castellated edge, no handle.
268×493 мм52 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 513 грн
Pelican 1535 Air lid MOLLE panel — slots, MD173
Pelican 1535 Air lid insert on the factory bosses, no drilling: 495×261 mm, 3 mm ABS, slots, 4 MD173 mounts, castellated edge, handle.
495×261 мм102 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 446 грн
Pelican 1535 Air lid MOLLE panel — slots, MD173, no handle
Pelican 1535 Air lid insert on the factory bosses, no drilling: 495×261 mm, 3 mm ABS, slots, 4 MD173 mounts, castellated edge, no handle.
495×261 мм110 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 454 грн
Pelican 1535 Air lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1535 Air lid insert on the factory bosses, no drilling: 495×261 mm, 3 mm ABS, slots + windows, 4 MD173 mounts, castellated edge, no handle.
495×261 мм52 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 499 грн
Pelican 1535 Air lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1535 Air lid insert on the factory bosses, no drilling: 261×495 mm, 3 mm ABS, slots (rows across), 4 MD173 mounts, castellated edge, no handle.
261×495 мм104 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 441 грн
Pelican 1535 Air lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1535 Air lid insert on factory bosses: 261×495 mm, 3 mm ABS, slots + windows (rows across), 4 MD173 mounts, castellated edge, no handle.
261×495 мм52 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 506 грн
Pelican 1550 lid MOLLE panel — slots, MD173
Pelican 1550 lid insert on the factory bosses, no drilling: 465×352 mm, 3 mm ABS, slots, 4 MD173 mounts, plain edge, handle.
465×352 мм129 slotsWith handleMD173 mount🔒 Drawing protected
from 568 грн
Pelican 1550 lid MOLLE panel — slots, MD173, no handle
Pelican 1550 lid insert on the factory bosses, no drilling: 465×352 mm, 3 mm ABS, slots, 5 MD173 mounts, plain edge, no handle.
465×352 мм138 slotsSlots onlyMD173 mount🔒 Drawing protected
from 581 грн
Pelican 1550 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1550 lid insert on the factory bosses, no drilling: 465×352 mm, 3 mm ABS, slots + windows, 5 MD173 mounts, plain edge, no handle.
465×352 мм63 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 642 грн
Pelican 1550 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1550 lid insert on the factory bosses, no drilling: 352×465 mm, 3 mm ABS, slots (rows across), 5 MD173 mounts, castellated edge, no handle.
352×465 мм135 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 582 грн
Pelican 1550 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1550 lid insert on factory bosses: 352×465 mm, 3 mm ABS, slots + windows (rows across), 5 MD173 mounts, castellated edge, no handle.
352×465 мм66 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 641 грн
Pelican 1556 Air lid MOLLE panel — slots, MD173
Pelican 1556 Air lid insert on the factory bosses, no drilling: 515×239 mm, 3 mm ABS, slots, 4 MD173 mounts, plain edge, handle.
515×239 мм97 slotsWith handleMD173 mount🔒 Drawing protected
from 442 грн
Pelican 1556 Air lid MOLLE panel — slots, MD173, no handle
Pelican 1556 Air lid insert on the factory bosses, no drilling: 515×239 mm, 3 mm ABS, slots, 4 MD173 mounts, plain edge, no handle.
515×239 мм107 slotsSlots onlyMD173 mount🔒 Drawing protected
from 455 грн
Pelican 1556 Air lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1556 Air lid insert on the factory bosses, no drilling: 515×239 mm, 3 mm ABS, slots + windows, 4 MD173 mounts, plain edge, no handle.
515×239 мм46 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 486 грн
Pelican 1556 Air lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1556 Air lid insert on the factory bosses, no drilling: 239×515 mm, 3 mm ABS, slots (rows across), 4 MD173 mounts, castellated edge, no handle.
239×515 мм96 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 437 грн
Pelican 1556 Air lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1556 Air lid insert on factory bosses: 239×515 mm, 3 mm ABS, slots + windows (rows across), 4 MD173 mounts, castellated edge, no handle.
239×515 мм50 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 482 грн
Pelican 1560 lid MOLLE panel — slots, MD173
Pelican 1560 lid insert on the factory bosses, no drilling: 504×378 mm, 3 mm ABS, slots, 5 MD173 mounts, castellated edge, handle.
504×378 мм154 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 692 грн
Pelican 1560 lid MOLLE panel — slots, MD173, no handle
Pelican 1560 lid insert on the factory bosses, no drilling: 504×378 mm, 3 mm ABS, slots, 6 MD173 mounts, castellated edge, no handle.
504×378 мм160 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 698 грн
Pelican 1560 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1560 lid insert on the factory bosses, no drilling: 504×378 mm, 3 mm ABS, slots + windows, 6 MD173 mounts, castellated edge, no handle.
504×378 мм76 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 771 грн
Pelican 1560 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1560 lid insert on the factory bosses, no drilling: 378×504 mm, 3 mm ABS, slots (rows across), 6 MD173 mounts, castellated edge, no handle.
378×504 мм160 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 698 грн
Pelican 1560 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1560 lid insert on factory bosses: 378×504 mm, 3 mm ABS, slots + windows (rows across), 6 MD173 mounts, castellated edge, no handle.
378×504 мм77 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 784 грн
Pelican 1595 Air lid MOLLE panel — slots, MD173
Pelican 1595 Air lid insert on the factory bosses, no drilling: 619×350 mm, 3 mm ABS, slots, 5 MD173 mounts, plain edge, handle.
619×350 мм180 slotsWith handleMD173 mount🔒 Drawing protected
from 744 грн
Pelican 1595 Air lid MOLLE panel — slots, MD173, no handle
Pelican 1595 Air lid insert on the factory bosses, no drilling: 619×350 mm, 3 mm ABS, slots, 6 MD173 mounts, plain edge, no handle.
619×350 мм189 slotsSlots onlyMD173 mount🔒 Drawing protected
from 757 грн
Pelican 1595 Air lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1595 Air lid insert on the factory bosses, no drilling: 619×350 mm, 3 mm ABS, slots + windows, 6 MD173 mounts, plain edge, no handle.
619×350 мм87 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 844 грн
Pelican 1595 Air lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1595 Air lid insert on the factory bosses, no drilling: 350×619 mm, 3 mm ABS, slots (rows across), 6 MD173 mounts, castellated edge, no handle.
350×619 мм180 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 745 грн
Pelican 1595 Air lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1595 Air lid insert on factory bosses: 350×619 mm, 3 mm ABS, slots + windows (rows across), 6 MD173 mounts, castellated edge, no handle.
350×619 мм92 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 844 грн
Pelican 1600 lid MOLLE panel — slots, MD173
Pelican 1600 lid insert on the factory bosses, no drilling: 542×416 mm, 3 mm ABS, slots, 6 MD173 mounts, castellated edge, handle.
542×416 мм188 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 812 грн
Pelican 1600 lid MOLLE panel — slots, MD173, no handle
Pelican 1600 lid insert on the factory bosses, no drilling: 542×416 mm, 3 mm ABS, slots, 7 MD173 mounts, castellated edge, no handle.
542×416 мм197 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 825 грн
Pelican 1600 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1600 lid insert on the factory bosses, no drilling: 542×416 mm, 3 mm ABS, slots + windows, 7 MD173 mounts, castellated edge, no handle.
542×416 мм97 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 917 грн
Pelican 1600 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1600 lid insert on the factory bosses, no drilling: 416×542 mm, 3 mm ABS, slots (rows across), 7 MD173 mounts, castellated edge, no handle.
416×542 мм198 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 827 грн
Pelican 1600 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1600 lid insert on factory bosses: 416×542 mm, 3 mm ABS, slots + windows (rows across), 7 MD173 mounts, castellated edge, no handle.
416×542 мм96 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 936 грн
Pelican 1606 Air lid MOLLE panel — slots, MD173
Pelican 1606 Air lid insert on the factory bosses, no drilling: 593×282 mm, 3 mm ABS, slots, 4 MD173 mounts, castellated edge, handle.
593×282 мм132 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 583 грн
Pelican 1606 Air lid MOLLE panel — slots, MD173, no handle
Pelican 1606 Air lid insert on the factory bosses, no drilling: 593×282 mm, 3 mm ABS, slots, 4 MD173 mounts, castellated edge, no handle.
593×282 мм142 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 596 грн
Pelican 1606 Air lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1606 Air lid insert on the factory bosses, no drilling: 593×282 mm, 3 mm ABS, slots + windows, 4 MD173 mounts, castellated edge, no handle.
593×282 мм71 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 686 грн
Pelican 1606 Air lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1606 Air lid insert on the factory bosses, no drilling: 282×593 mm, 3 mm ABS, slots (rows across), 4 MD173 mounts, castellated edge, no handle.
282×593 мм134 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 579 грн
Pelican 1606 Air lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1606 Air lid insert on factory bosses: 282×593 mm, 3 mm ABS, slots + windows (rows across), 4 MD173 mounts, castellated edge, no handle.
282×593 мм64 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 647 грн
Pelican 1610 / 1620 lid MOLLE panel — slots, MD173
Pelican 1610 lid insert on the factory bosses, no drilling: 551×422 mm, 3 mm ABS, slots, 7 MD173 mounts, castellated edge, handle.
551×422 мм184 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 806 грн
Pelican 1610 / 1620 lid MOLLE panel — slots, MD173, no handle
Pelican 1610 lid insert on the factory bosses, no drilling: 551×422 mm, 3 mm ABS, slots, 7 MD173 mounts, castellated edge, no handle.
551×422 мм193 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 816 грн
Pelican 1610 / 1620 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1610 lid insert on the factory bosses, no drilling: 551×422 mm, 3 mm ABS, slots + windows, 7 MD173 mounts, castellated edge, no handle.
551×422 мм100 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 898 грн
Pelican 1610 / 1620 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1610 lid insert on the factory bosses, no drilling: 422×551 mm, 3 mm ABS, slots (rows across), 7 MD173 mounts, castellated edge, no handle.
422×551 мм190 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 810 грн
Pelican 1610 / 1620 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1610 lid insert on factory bosses: 422×551 mm, 3 mm ABS, slots + windows (rows across), 7 MD173 mounts, castellated edge, no handle.
422×551 мм93 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 897 грн
Pelican 1615 Air lid MOLLE panel — slots, MD173
Pelican 1615 Air lid insert on the factory bosses, no drilling: 713×356 mm, 3 mm ABS, slots, 4 MD173 mounts, castellated edge, handle.
713×356 мм218 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 010 грн
Pelican 1615 Air lid MOLLE panel — slots, MD173, no handle
Pelican 1615 Air lid insert on the factory bosses, no drilling: 713×356 mm, 3 mm ABS, slots, 4 MD173 mounts, castellated edge, no handle.
713×356 мм226 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 018 грн
Pelican 1615 Air lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1615 Air lid insert on the factory bosses, no drilling: 713×356 mm, 3 mm ABS, slots + windows, 4 MD173 mounts, castellated edge, no handle.
713×356 мм118 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 159 грн
Pelican 1615 Air lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1615 Air lid insert on the factory bosses, no drilling: 356×713 mm, 3 mm ABS, slots (rows across), 4 MD173 mounts, castellated edge, no handle.
356×713 мм208 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 980 грн
Pelican 1615 Air lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1615 Air lid insert on factory bosses: 356×713 mm, 3 mm ABS, slots + windows (rows across), 4 MD173 mounts, castellated edge, no handle.
356×713 мм108 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 117 грн
Pelican 1630 lid MOLLE panel — slots, MD173
Pelican 1630 lid insert on the factory bosses, no drilling: 707×529 mm, 3 mm ABS, slots, 5 MD173 mounts, castellated edge, handle.
707×529 мм340 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 589 грн
Pelican 1630 lid MOLLE panel — slots, MD173, no handle
Pelican 1630 lid insert on the factory bosses, no drilling: 707×529 mm, 3 mm ABS, slots, 6 MD173 mounts, castellated edge, no handle.
707×529 мм346 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 596 грн
Pelican 1630 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1630 lid insert on the factory bosses, no drilling: 707×529 mm, 3 mm ABS, slots + windows, 6 MD173 mounts, castellated edge, no handle.
707×529 мм172 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 778 грн
Pelican 1630 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1630 lid insert on the factory bosses, no drilling: 529×707 mm, 3 mm ABS, slots (rows across), 6 MD173 mounts, castellated edge, no handle.
529×707 мм339 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 581 грн
Pelican 1630 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1630 lid insert on factory bosses: 529×707 mm, 3 mm ABS, slots + windows (rows across), 6 MD173 mounts, castellated edge, no handle.
529×707 мм164 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 779 грн
Pelican 1640 lid MOLLE panel — slots, MD173
Pelican 1640 lid insert on the factory bosses, no drilling: 609×609 mm, 3 mm ABS, slots, 7 MD173 mounts, castellated edge, handle.
609×609 мм324 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 558 грн
Pelican 1640 lid MOLLE panel — slots, MD173, no handle
Pelican 1640 lid insert on the factory bosses, no drilling: 609×609 mm, 3 mm ABS, slots, 8 MD173 mounts, castellated edge, no handle.
609×609 мм332 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 569 грн
Pelican 1640 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1640 lid insert on the factory bosses, no drilling: 609×609 mm, 3 mm ABS, slots + windows, 8 MD173 mounts, castellated edge, no handle.
609×609 мм160 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 742 грн
Pelican 1640 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1640 lid insert on the factory bosses, no drilling: 609×609 mm, 3 mm ABS, slots (rows across), 8 MD173 mounts, castellated edge, no handle.
609×609 мм332 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 569 грн
Pelican 1640 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1640 lid insert on factory bosses: 609×609 mm, 3 mm ABS, slots + windows (rows across), 8 MD173 mounts, castellated edge, no handle.
609×609 мм160 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 752 грн
Pelican 1650 lid MOLLE panel — slots, MD173
Pelican 1650 lid insert on the factory bosses, no drilling: 726×446 mm, 3 mm ABS, slots, 5 MD173 mounts, castellated edge, handle.
726×446 мм284 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 159 грн
Pelican 1650 lid MOLLE panel — slots, MD173, no handle
Pelican 1650 lid insert on the factory bosses, no drilling: 726×446 mm, 3 mm ABS, slots, 6 MD173 mounts, castellated edge, no handle.
726×446 мм290 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 166 грн
Pelican 1650 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1650 lid insert on the factory bosses, no drilling: 726×446 mm, 3 mm ABS, slots + windows, 6 MD173 mounts, castellated edge, no handle.
726×446 мм132 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 292 грн
Pelican 1650 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1650 lid insert on the factory bosses, no drilling: 446×726 mm, 3 mm ABS, slots (rows across), 6 MD173 mounts, castellated edge, no handle.
446×726 мм292 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 170 грн
Pelican 1650 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1650 lid insert on factory bosses: 446×726 mm, 3 mm ABS, slots + windows (rows across), 6 MD173 mounts, castellated edge, no handle.
446×726 мм148 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 322 грн
Pelican 1660 lid MOLLE panel — slots, MD173
Pelican 1660 lid insert on the factory bosses, no drilling: 716×499 mm, 3 mm ABS, slots, 5 MD173 mounts, castellated edge, handle.
716×499 мм314 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 532 грн
Pelican 1660 lid MOLLE panel — slots, MD173, no handle
Pelican 1660 lid insert on the factory bosses, no drilling: 716×499 mm, 3 mm ABS, slots, 6 MD173 mounts, castellated edge, no handle.
716×499 мм318 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 534 грн
Pelican 1660 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1660 lid insert on the factory bosses, no drilling: 716×499 mm, 3 mm ABS, slots + windows, 6 MD173 mounts, castellated edge, no handle.
716×499 мм156 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 725 грн
Pelican 1660 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1660 lid insert on the factory bosses, no drilling: 499×716 mm, 3 mm ABS, slots (rows across), 6 MD173 mounts, castellated edge, no handle.
499×716 мм312 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 522 грн
Pelican 1660 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1660 lid insert on factory bosses: 499×716 mm, 3 mm ABS, slots + windows (rows across), 6 MD173 mounts, castellated edge, no handle.
499×716 мм162 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 727 грн
Pelican 1670 lid MOLLE panel — slots, MD173
Pelican 1670 lid insert on the factory bosses, no drilling: 704×411 mm, 3 mm ABS, slots, 12 MD173 mounts, plain edge, handle.
704×411 мм244 slotsWith handleMD173 mount🔒 Drawing protected
from 1 078 грн
Pelican 1670 lid MOLLE panel — slots, MD173, no handle
Pelican 1670 lid insert on the factory bosses, no drilling: 704×411 mm, 3 mm ABS, slots, 12 MD173 mounts, plain edge, no handle.
704×411 мм252 slotsSlots onlyMD173 mount🔒 Drawing protected
from 1 086 грн
Pelican 1670 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1670 lid insert on the factory bosses, no drilling: 704×411 mm, 3 mm ABS, slots + windows, 12 MD173 mounts, plain edge, no handle.
704×411 мм128 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 207 грн
Pelican 1670 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1670 lid insert on the factory bosses, no drilling: 411×704 mm, 3 mm ABS, slots (rows across), 12 MD173 mounts, castellated edge, no handle.
411×704 мм245 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 081 грн
Pelican 1670 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1670 lid insert on factory bosses: 411×704 mm, 3 mm ABS, slots + windows (rows across), 12 MD173 mounts, castellated edge, no handle.
411×704 мм122 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 233 грн
Pelican 1690 lid MOLLE panel — slots, MD173
Pelican 1690 lid insert on the factory bosses, no drilling: 762×635 mm, 3 mm ABS, slots, 8 MD173 mounts, castellated edge, handle.
762×635 мм435 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 811 грн
Pelican 1690 lid MOLLE panel — slots, MD173, no handle
Pelican 1690 lid insert on the factory bosses, no drilling: 762×635 mm, 3 mm ABS, slots, 9 MD173 mounts, castellated edge, no handle.
762×635 мм444 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 824 грн
Pelican 1690 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1690 lid insert on the factory bosses, no drilling: 762×635 mm, 3 mm ABS, slots + windows, 9 MD173 mounts, castellated edge, no handle.
762×635 мм226 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 2 081 грн
Pelican 1690 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1690 lid insert on the factory bosses, no drilling: 635×762 mm, 3 mm ABS, slots (rows across), 9 MD173 mounts, castellated edge, no handle.
635×762 мм448 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 832 грн
Pelican 1690 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1690 lid insert on factory bosses: 635×762 mm, 3 mm ABS, slots + windows (rows across), 9 MD173 mounts, castellated edge, no handle.
635×762 мм216 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 2 095 грн
Pelican 1700 lid MOLLE panel — slots, MD173
Pelican 1700 lid insert on the factory bosses, no drilling: 901×341 mm, 3 mm ABS, slots, 10 MD173 mounts, castellated edge, handle.
901×341 мм261 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 126 грн
Pelican 1700 lid MOLLE panel — slots, MD173, no handle
Pelican 1700 lid insert on the factory bosses, no drilling: 901×341 mm, 3 mm ABS, slots, 12 MD173 mounts, castellated edge, no handle.
901×341 мм267 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 134 грн
Pelican 1700 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1700 lid insert on the factory bosses, no drilling: 901×341 mm, 3 mm ABS, slots + windows, 12 MD173 mounts, castellated edge, no handle.
901×341 мм128 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 241 грн
Pelican 1700 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1700 lid insert on the factory bosses, no drilling: 341×901 mm, 3 mm ABS, slots (rows across), 12 MD173 mounts, castellated edge, no handle.
341×901 мм246 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 090 грн
Pelican 1700 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1700 lid insert on factory bosses: 341×901 mm, 3 mm ABS, slots + windows (rows across), 12 MD173 mounts, castellated edge, no handle.
341×901 мм120 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 213 грн
Pelican 1720 lid MOLLE panel — slots, MD173
Pelican 1720 lid insert on the factory bosses, no drilling: 1046×325 mm, 3 mm ABS, slots, 12 MD173 mounts, castellated edge, handle.
1046×325 мм281 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 489 грн
Pelican 1720 lid MOLLE panel — slots, MD173, no handle
Pelican 1720 lid insert on the factory bosses, no drilling: 1046×325 mm, 3 mm ABS, slots, 12 MD173 mounts, castellated edge, no handle.
1046×325 мм289 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 497 грн
Pelican 1720 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1720 lid insert on the factory bosses, no drilling: 1046×325 mm, 3 mm ABS, slots + windows, 12 MD173 mounts, castellated edge, no handle.
1046×325 мм139 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 573 грн
Pelican 1720 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1720 lid insert on the factory bosses, no drilling: 325×1046 mm, 3 mm ABS, slots (rows across), 12 MD173 mounts, castellated edge, no handle.
325×1046 мм290 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 499 грн
Pelican 1720 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1720 lid insert on factory bosses: 325×1046 mm, 3 mm ABS, slots + windows (rows across), 12 MD173 mounts, castellated edge, no handle.
325×1046 мм130 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 600 грн
Pelican 1730 lid MOLLE panel — slots, MD173
Pelican 1730 lid insert on the factory bosses, no drilling: 864×610 mm, 3 mm ABS, slots, 7 MD173 mounts, castellated edge, handle.
864×610 мм477 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 901 грн
Pelican 1730 lid MOLLE panel — slots, MD173, no handle
Pelican 1730 lid insert on the factory bosses, no drilling: 864×610 mm, 3 mm ABS, slots, 8 MD173 mounts, castellated edge, no handle.
864×610 мм482 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 905 грн
Pelican 1730 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1730 lid insert on the factory bosses, no drilling: 864×610 mm, 3 mm ABS, slots + windows, 8 MD173 mounts, castellated edge, no handle.
864×610 мм255 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 2 217 грн
Pelican 1730 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1730 lid insert on the factory bosses, no drilling: 610×864 mm, 3 mm ABS, slots (rows across), 8 MD173 mounts, castellated edge, no handle.
610×864 мм479 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 899 грн
Pelican 1730 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1730 lid insert on factory bosses: 610×864 mm, 3 mm ABS, slots + windows (rows across), 8 MD173 mounts, castellated edge, no handle.
610×864 мм247 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 2 217 грн
Pelican 1745 Air lid MOLLE panel — slots, MD173
Pelican 1745 Air lid insert on the factory bosses, no drilling: 1067×376 mm, 3 mm ABS, slots, 8 MD173 mounts, castellated edge, handle.
1067×376 мм356 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 2 028 грн
Pelican 1745 Air lid MOLLE panel — slots, MD173, no handle
Pelican 1745 Air lid insert on the factory bosses, no drilling: 1067×376 mm, 3 mm ABS, slots, 8 MD173 mounts, castellated edge, no handle.
1067×376 мм366 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 2 040 грн
Pelican 1745 Air lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1745 Air lid insert on the factory bosses, no drilling: 1067×376 mm, 3 mm ABS, slots + windows, 8 MD173 mounts, castellated edge, no handle.
1067×376 мм179 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 2 209 грн
Pelican 1745 Air lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1745 Air lid insert on the factory bosses, no drilling: 376×1067 mm, 3 mm ABS, slots (rows across), 8 MD173 mounts, castellated edge, no handle.
376×1067 мм357 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 2 021 грн
Pelican 1745 Air lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1745 Air lid insert on factory bosses: 376×1067 mm, 3 mm ABS, slots + windows (rows across), 8 MD173 mounts, castellated edge, no handle.
376×1067 мм181 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 2 235 грн
Pelican 1750 lid MOLLE panel — slots, MD173
Pelican 1750 lid insert on the factory bosses, no drilling: 1263×323 mm, 3 mm ABS, slots, 12 MD173 mounts, castellated edge, handle.
1263×323 мм353 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 657 грн
Pelican 1750 lid MOLLE panel — slots, MD173, no handle
Pelican 1750 lid insert on the factory bosses, no drilling: 1263×323 mm, 3 mm ABS, slots, 12 MD173 mounts, castellated edge, no handle.
1263×323 мм361 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 665 грн
Pelican 1750 lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1750 lid insert on the factory bosses, no drilling: 1263×323 mm, 3 mm ABS, slots + windows, 12 MD173 mounts, castellated edge, no handle.
1263×323 мм175 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 770 грн
Pelican 1750 lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1750 lid insert on the factory bosses, no drilling: 323×1263 mm, 3 mm ABS, slots (rows across), 12 MD173 mounts, castellated edge, no handle.
323×1263 мм358 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 659 грн
Pelican 1750 lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1750 lid insert on factory bosses: 323×1263 mm, 3 mm ABS, slots + windows (rows across), 12 MD173 mounts, castellated edge, no handle.
323×1263 мм158 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 772 грн
Pelican 1755 Air lid MOLLE panel — slots, MD173
Pelican 1755 Air lid insert on the factory bosses, no drilling: 1369×328 mm, 3 mm ABS, slots, 12 MD173 mounts, castellated edge, handle.
1369×328 мм383 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 728 грн
Pelican 1755 Air lid MOLLE panel — slots, MD173, no handle
Pelican 1755 Air lid insert on the factory bosses, no drilling: 1369×328 mm, 3 mm ABS, slots, 12 MD173 mounts, castellated edge, no handle.
1369×328 мм393 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 741 грн
Pelican 1755 Air lid MOLLE panel — slots + windows, MD173, no handle
Pelican 1755 Air lid insert on the factory bosses, no drilling: 1369×328 mm, 3 mm ABS, slots + windows, 12 MD173 mounts, castellated edge, no handle.
1369×328 мм189 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 846 грн
Pelican 1755 Air lid MOLLE panel — slots, MD173, rows across, no handle
Pelican 1755 Air lid insert on the factory bosses, no drilling: 328×1369 mm, 3 mm ABS, slots (rows across), 12 MD173 mounts, castellated edge, no handle.
328×1369 мм392 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 1 739 грн
Pelican 1755 Air lid MOLLE panel — slots + windows, MD173, rows across, no handle
Pelican 1755 Air lid insert on factory bosses: 328×1369 mm, 3 mm ABS, slots + windows (rows across), 12 MD173 mounts, castellated edge, no handle.
328×1369 мм192 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 957 грн
Pelican 1780 lid MOLLE panel — slots, MD173
Pelican 1780 lid insert on the factory bosses, no drilling: 1038×540 mm, 3 mm ABS, slots, 12 MD173 mounts, exact lid outline.
1038×540 мм502 slotsSlots onlyMD173 mount🔒 Drawing protected
from 3 492 грн
panel MOLLE for case SL55
panel MOLLE for case SL55
576×340 мм162 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 853 грн
Case panel TENAX CASE 750H280
Case panel TENAX CASE 750H280
730×465 мм159 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 668 грн
panel MOLLE for case SL55
panel MOLLE for case SL55
340×576 мм79 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 936 грн
panel MOLLE for case SL55
panel MOLLE for case SL55
340×576 мм153 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 828 грн
panel ORPRO Travel 150
panel ORPRO Travel 150
740×415 мм130 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 1 471 грн
panel ORPRO Travel 150
panel ORPRO Travel 150
740×415 мм248 slotsWith handleMD173 mount🔒 Drawing protected
from 1 283 грн
Panel for Pelican 1500 case
Panel for Pelican 1500 case
428×286 мм47 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 598 грн
Panel for Pelican 1500 case
Panel for Pelican 1500 case
428×286 мм94 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 516 грн
Panel for Pelican 1500 case
Panel for Pelican 1500 case
286×428 мм92 slotsCastellated edgeMD173 mount🔒 Drawing protected
from 511 грн
panel MOLLE for case SL55
panel MOLLE for case SL55
576×340 мм78 slotsSlots + windowsMD173 mount🔒 Drawing protected
from 936 грн