Vehicle fit
Mercedes Sprinter
Van wall between ribs, 2019+. 600 × 400 mm. Sized to span two body ribs on a 144" wheelbase.
| Vehicle | Mercedes Sprinter, 2019+ |
|---|---|
| Mounting location | Van wall between ribs |
| Panel size | 600 × 400 mm |
| Grid | PALS standard — 38.1 mm horizontal, 25.4 mm row pitch |
| Suggested material | 4 mm HDPE, 4 mm plywood or 3 mm aluminium |
draft. Draft dimensions: not yet measured on a physical vehicle. Print the outline, offer it up and adjust before cutting. Measured one yourself? Send the numbers and we will publish them with your credit.
How to fit it
- Open the size above — the generator loads with these dimensions already set.
- Print the outline at 100% and offer it up, marking the real obstructions: wiring, trim clips, curvature.
- Adjust width, height and margins, add perimeter holes where the factory anchor points are.
- Export the DXF, cut, deburr the slot edges. Mount to factory anchor points rather than drilling new ones where you can.